Figure TSE382 sealant

Product type


Momentive TSE382 silicone is a single component silicone adhesive sealant which is neutral sulfide. Mica tse382 can react with water from the air at room temperature to form a silicone elastomer with excellent properties. Metu tse382 does


look tel 138 2332 2786

Product overview

   Momentive TSE382 silicone is a single component, silicone adhesive sealant, which is neutral sulfide.
Mica tse382 can react with water from the air at room temperature to form a silicone elastomer with excellent properties.
Metu tse382 does not need a primer to have good adhesion to most of the substrate materials such as metals, ceramics, plastics and glass.
 
Product features
 
No primer for a variety of substrate
Neutral vulcanization;
Little corrosive
Excellent heat resistance and cold resistance;
From 55 ℃ to 200 ℃ for operation
Excellent weathering, ozone resistance and chemical resistance
Excellent dielectric properties
 
Application scenarios
 
Metu TSE382 is mainly used in the waterproof seal of electrical and communications equipment.
The air tightness of the instrument used to prevent the intrusion of water and dust;
Oil proof seal for car engine;
A general adhesive seal of metal, glass and plastic.
 
The performance parameters
Method of use
 
Clean surface: it is cleaned by the surface of the sticky material, ensuring that the surface of sticky or coated surfaces is clean, no oil, no dust, etc.
Glue: squeeze the gel onto the cleaned surface and distribute it evenly. It will be glued together
Solidification: the process of solidifying in the air with a glued or sealed component will be solidified by the surface.
After the operation is completed, the adhesive should be tightened and sealed immediately.


Professional adhesive technology solution please click for consultation
 
 
 



 
 



Application scenarios



performance



usage method



technical support



Professional adhesive technology solution please click for consultation
 
 
 



 



Back
top