HF8000-83D arc trace deplating cleaning equipment

Plasma cleaning equipment


HF8000-8 is the latest 3D cleaning and deplating machine developed by our company mainly for large curved 3D cover 3D protective film 3D car glass and 2D 2.5D and glass products that require secondary deplating and repair. This machine is made fro


look tel 138 2332 2786

Product overview

HF8000-8 3D arc trajectory deplating cleaning equipment is the latest 3D cleaning and deplating machine developed by our company, mainly for large curved 3D cover plates, 3D protective sheets, 3D car glass and 2D, 2.5D and the need for secondary deplating and repair. For glass products, this machine uses Taiwan's jet discharge plasma technology, which mainly relies on the "activation" of corona active particles in the plasma to achieve the purpose of removing stains on the surface of the object. The principle of plasma clearing reaction: Firstly, the inorganic gas is excited to the plasma state; the gas phase material is adsorbed on the solid surface; the adsorbed group reacts with the solid surface molecules to form product molecules; the product molecules resolve to form a gas phase; and the reaction residues are promoted to leave the surface , Realize the product clean as new.






Seismometer 3D arc trajectory deplating cleaning equipment is used for cleaning and deplating surface treatment in industries such as glass cover plates, display touch screens, protective sheets, optical materials, and electronic circuits.
 
 
     Seismic German plasma cleaning and deplating machine is used for cleaning and deplating surface treatment of glass cover, display touch screen, protective film, optical material, electronic circuit and other industries.



Application scenarios

HF8000-83D弧线轨迹退镀清洗设备



performance

HF8000-83D弧线轨迹退镀清洗设备



usage method

1. You should be very familiar with the location of the emergency stop button;

2. Do not press the operation button and the travel switch at will;

3. Do not touch any switch with wet hands to avoid electric shock;

4. When the power supply is suddenly cut off the switch of the electrical cabinet should be turned off immediately;

5. Do not open the door of the electrical cabinet easily and are not allowed to change the set equipment parameters and potentiometers;

6. Do not touch the control device servo device and other live components in the electrical cabinet when the power is on;

7. When the nozzle is adjusted there must be a flow rate and the cavity needle cannot be pressed too low otherwise the cavity needle and nozzle will be easy
Wear and damage causing liquid leakage.



technical support

HF8000-83D弧线轨迹退镀清洗设备



Back
top