Dow corning CN8880

Product type


Dow corning CN - 8880 conductive silicone grease is an environmentally friendly single group of products with low viscosity and low volatile organic compounds. This solvent elastic-plastic silicone resin has excellent abrasion resistance, w


look tel 138 2332 2786

Product overview

   Dow corning CN - 8880 conductive silicone grease is an environmentally friendly single group of products with low viscosity and low volatile organic compounds.
This solvent elastic-plastic silicone resin has excellent abrasion resistance, which can be solidified at room temperature or heated.
 
Product features
 
The thermal conductivity of CN8880 is significant, and the thermal conductivity is 1W/mk.
About 836 Pa - SEC CN8880 viscosity, liquidity, use rise very convenient and efficient, and under the condition of 150 ° / 24 hours from the oil rate is less than 0.001, the product can be in - use for a long time between 50 ° C to 200 ° C, have excellent temperature resistance.
 
Application scenarios
 
1, to form a layer of heat in a hot tube, such as an iron, a coffee pot, and a heating tube in an electric kettle.
2, the media for the power amplification tube and heat sink of the electronic industry: such as TV, CD, VCD, IC and amplifier on computer host, etc.
3, the other is widely used in water machine, air conditioner, ballast, UPS, cars, planes and so on, all kinds of heat transfer position, electronics, electrical, electronics, household appliances, CPU, radiator manufacturers.
Suitable to fill the gap between light source module and radiator in LED lamps, including transistor, diode, rectifier base and other heat source.
The CN8880 has high heat conductivity to meet the heat transfer demand of the LED, and the good liquidity and thermal stability of the product can also help to improve the efficiency of the work.
 
The performance parameters
Method of use
 
Clean surface: it is cleaned by the surface of the sticky substance, ensuring that the surface is dry, no oil, no dust.
Glue: apply glue to the adhesive surface and press together.
Solidification: dry 24-120 hours to ensure maximum adhesion strength.


Professional adhesive technology solution please click for consultation
 
 
Dow corning CN8880  for the purchase of links::
 
 



Application scenarios



performance



usage method



technical support



Professional adhesive technology solution please click for consultation
 
 
Dow corning CN8880  for the purchase of links::
 
 



Back
top