Views：62 Writer：Rogen Date：2021-12-10
Nowadays, the cleaning technology of plasma cleaning machine has been widely used in many industries, and is widely sought after by the public. First, the surface of the substrate can be effectively cleaned. Second, the plasma cleaning machine that selects the shares of the seismometer can greatly reduce the cleaning cost and greatly improve the production efficiency. So what are the surface contaminants that can be treated by plasma cleaning machine for surface cleaning?
In fact, when many companies manufacture products, the product workpiece often has multiple layers of contaminants covering the surface, even if the latter looks visually clean. Pollutants form naturally due to exposure to air. These pollutants include oxide layer, water layer, various organic materials and dust, etc. In addition, during the process of technical treatment, the surface can be covered with oil, release agent, compound composition, monomer and exudation of low molecular weight substances, etc. Contaminants can greatly degrade bonding by introducing weak interlayers. Thus it will lead to product yield and quality will be greatly affected. In addition, these pollutants. Low wettability usually results in the adhesive not completely covering the workpiece surface, further reducing the bonding strength.
At present, almost all materials have invisible fine dirt on the surface, which seriously affects further surface treatment, such as bonding, printing, painting or coating. These fine impurities on metal, plastic or inorganic materials can be removed by plasma cleaning without the use of additional chemicals. In contrast to plasma coating or plasma etching, no coating is removed or attached to the workpiece surface, but only modified.
At this point, it is imperative to adopt the plasma cleaning machine of seismoscope. Using the plasma cleaning machine of seismoscope to carry out fine cleaning on the surface can remove organic, inorganic and microbial surface pollutants as well as strong adhesion dust particles and other stains. Cleaning is very efficient and gentle on treated surfaces. At higher strengths, it can remove weak surface boundary layers, cross-link surface molecules, and even reduce hard metal oxides. Plasma cleaning improves wettability and adhesion to support a wide range of industrial processes, preparing surfaces for bonding, gluing, coating and painting. Although air or typical industrial gases (hydrogen, nitrogen, and oxygen) are used for cleaning, wet chemistry and expensive vacuum equipment can be avoided, resulting in just the right development in terms of cost, safety, and environment, and the rapid processing speed further facilitates many industrial applications. Plasma cleaning machine, look for seismometer shares!