knowledge

Why does plasma spray coating equipment have to have flow when adjusting the nozzle?

Views:73 Writer:admin Date:2021-09-02

  When we use plasma spray coating equipment? It may be sprayed and coated for different types, different sizes and different types of products. In the process of spraying and coating, we need to control the spraying flow rate and adjust the flow rate to achieve the best coating effect. It is also accurate. Adjusting the flow rate can also effectively realize the effect of saving coating liquid. At the same time, when we start product coating, we always need to measure the spraying flow rate to achieve the whole line production with the best spraying flow rate. So why does the plasma spray coating equipment have to have a flow rate when adjusting the nozzles? Next, let Rogen, editor of Seismic Instruments, tell you why!
 

Why does plasma spray coating equipment have to have flow when adjusting the nozzle?

 

  First of all, in the previous content, it is introduced that we need to accurately measure and control the flow rate of the spray coating before coating the corresponding product. The main purpose of controlling the flow rate is to optimize the coating effect, save the flow rate, and trace back later. And the benefits of continuous adjustment and optimization. So why does the plasma spray coating equipment have to have a flow when adjusting the nozzle?
 

  Because in the case of flow, the nozzle is adjusted to control the flow, so that the fluidity of the flow is real-time, and the flow allows us to better control the nozzle, better control the flow, and the accuracy will be higher. So what are the matters needing attention when adjusting the nozzle? Then here Rogen will simply tell you something that you need to pay attention to when adjusting the nozzle!
 

  First of all, there must be a flow rate when adjusting the nozzle. We have already mentioned it above, so I won't describe it.
 

  The second is that the cavity needle cannot be pressed too low when adjusting the nozzle, otherwise the cavity needle and the nozzle are easily worn and damaged, which will cause liquid leakage.
 

  The above is the related content of "Why the plasma spray coating equipment must have flow when adjusting the nozzle and the precautions when adjusting the nozzle". After reading these contents, will it help you? If it is helpful, please continue to pay attention to Seismic Instruments! Zhenyi shares is a professional AF/AG/AR/AB spray coating equipment manufacturer and a complete spray coating line solution provider.

key word:
Back
top