knowledge

How many steps can AF coating products be divided into from the process line to the finished product?

Views:106 Writer:admin Date:2021-09-23

  With the gradual increase in the frequency of use of the Internet of Things and big data high-tech in the market, and touch terminals as the communication medium of the Internet of Things and big data, the market space for flat panel display devices continues to expand, precisely because of this market environment It is also imperative for various manufacturers to apply AF anti-fingerprint coating to touch terminals.

How many steps can AF coating products be divided into from the process line to the finished product?

  Some people may have questions here. Is AF anti-fingerprint coating difficult? Are the technical requirements high? AF coating products can be divided into several steps and a series of problems from the process line to the finished product. Next, the editor of Zhenyi shares, Rogen, will tell you: AF anti-fingerprint coating is not difficult, the technical requirements are not high, and there are different requirements according to different products. How many steps can be divided into AF coating products from the process line to the finished product?
 

  AF coating products can be divided into the following four steps from the process line to the finished product:
 

  (1) Pretreatment before coating: In order to make the AF anti-fingerprint coating effect of the AF liquid on the workpiece better, pretreatment will be carried out before coating. The AF plasma spraying equipment manufacturer Zhenyi Co., Ltd. uses plasma for pretreatment before coating. , It can remove oil, moisture and other stains on the surface of the board, and at the same time, it can also activate the surface of the workpiece, and the spraying effect will be better. The use of plasma as cleaning can make the cleaning efficiency high and the treatment effect better, which can effectively increase the production capacity of the product.
 

  (2) AF syrup spraying is applied after the pre-treatment, and the AF syrup is coated on the surface of the workpiece. In the spraying area, Seismic adopts differential compensation double nozzle high-pressure spraying processing, which has a compensation function to effectively prevent spray leakage and atomization. Even, reduce product contamination rate and improve product quality.
 

  (3) It needs to be baked after spraying, so that it can enhance the coating effect of the product. In this link, Seismic is different from other manufacturers, and it does not need to be taken out and then baked in the oven. The AF plasma spraying equipment of Seismic involves an oven and can come up with different solutions according to different product production needs. It enables enterprises to realize high-efficiency, high-quality and intelligent production methods in the production process.
 

  (4) The last step is to clean the product and then package the finished product.
 

  The above is the relevant content of "Four steps from process line to finished product for AF coating products". The AF coating step may have different process requirements for different products, but the general difference is not very large. At present, the superposition of the three major process technologies of AR+AF+AG is already a major development trend in the current market. As a manufacturer and solution provider of AR+AF+AG automation equipment, Guangdong Zhenyi Intelligent Equipment Co., Ltd. can help customers meet certain production requirements. At the same time, it can also provide customers with all-in-one equipment, with higher production efficiency, small footprint, and simple operation. It is a great sword to participate in product market competition.

key word:
Back
top